c5310 vcxo vec tron international www.vectron.com v. 2007 - 03 - 09 page 1 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 100 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax typical applications features base stations surface mount package test equipment reflow process compatible switching at - cut crystal portable equipment low phase noise tight stability frequency range 1 mhz ? 7 00 mhz standard frequencies 2.04 8; 10; 13; 16.384; 30.720; 32.768; 38.880 ; 44.8 mhz 51.840; 52.00 ; 58.9824; 61.44; 68.736; 77.760; 76.8 mhz 81.92; 92.16; 100; 112; 122.88; 125; 134.4; 153.6; 155,52 mhz 156.25; 160; 179.2; 184.32; 245.76; 312.5; 320; 368.64 mhz 400; 448; 491.52; 622. 08 ; 6 72 mhz frequency stabilities 1 parameter min typ max. units operating temp range ordering code 5 vs. opera ting temperature range (referenced to +25 c) - 15.0 +15.0 ppm - 20 ? +70c d105 parameter min typ max. units condition initial tolerance vs. supp ly voltage change vs. load change vs. aging /1. year vs. aging / year (followingyears) - 10.0 - 3.0 - 1.0 - 3.0 - 1.0 +10.0 +3.0 +1.0 +3.0 +1.0 ppm ppm ppm ppm ppm @vc=vs/2 v s 5% load 10% frequency stabilities 1 parameter min typ max. units operating temp range ordering code 5 vs. operating temperature range (referenced to +25 c) - 30.0 +30.0 ppm - 40 ? +85c f305 parameter min typ max. units condition initial tolerance vs. supply voltage change vs. load change vs. aging /1. year vs. aging / year (followingyears) - 15.0 - 3.0 - 2,0 - 3.0 - 1.0 +15.0 +3.0 +2.0 +3.0 +1.0 ppm ppm ppm ppm ppm @vc=vs/2 v s 5% load 10% supply voltage parameter min typ max. units condition ordering code 5 supply voltage (vs) 4.75 5.0 5.25 vdc sv050 current consumption 40 ma @ hcmos current consumption 90 ma @ pecl supply voltage (vs) 3.135 3.3 3.465 vdc sv033 current consumption 30 ma @ lvhcmos current consumption 80 ma @ lvpecl current consumption 25 ma @ lvds
c5310 vcxo vec tron international www.vectron.com v. 2007 - 03 - 09 page 2 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 100 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax rf output parameter min typ max. units condition ordering code 5 signal hcmos rfh load 15.0 pf rise and fall time 5 ns @ 15 pf 10 to 90 % duty cycle 40 60 % @ vs/2 signal pecl rfp load 50 vs - 2v rise and fall time 1 ns 20 to 80 % duty cycle 45 55 % signal lvds rfl load 100 rise and fall time 1 ns 10 to 90 % duty cycle 40 60 % signal sinewave rfs load 50 output power - 3 0 3 dbm frequency tuning (efc) parameter min typ max. units condition tuning range 75 .0 10 0.0 9 0.0 14 0.0 +200.0 20 0.0 ppm ppm frequency > 40mhz frequency <40mhz linearity 10 % tuning slope positive control voltage range 0.0 0.5 1.65 2.5 3.3 4.5 vdc vdc with vs=3.3vdc with vs=5.0vdc frequency control input impedance 10 k additio nal parameters parameter min typ max. units condition phase noise - 85 dbc/hz 10 hz @52 mhz - 115 dbc/hz 100 hz hcmos - 138 dbc/hz 1 khz 3,3v - 153 dbc/hz 10 khz - 155 dbc/hz 100 khz jitter 0,3 ps rms @ 12 khz to 20 mhz phase noise - 80 dbc/hz 10 hz @155 ,52 mhz - 105 dbc/hz 100 hz pecl - 135 dbc/hz 1 khz 3,3v - 143 dbc/hz 10 khz - 143 dbc/hz 100 khz jitter 0,6 ps rms @ 12 khz to 20 mhz phase noise - 80 dbc/hz 10 hz @155 ,52 mhz - 112 dbc/hz 100 hz lvds - 13 0 dbc/hz 1 khz 3,3v - 150 dbc/hz 10 khz - 155 dbc/hz 100 khz jitter 0,2 ps rms @ 12 khz to 20 mhz
c5310 vcxo vec tron international www.vectron.com v. 2007 - 03 - 09 page 3 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 100 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax phase noise - 55 dbc/hz 10 hz @622,08 mhz - 85 dbc/hz 100 hz pecl - 115 dbc/hz 1 khz 3,3v - 140 dbc/hz 10 khz - 150 dbc/hz 100 kh z jitter 0,1 ps rms @ 12 khz to 20 mhz weight 2 g processing & packing handling&processing note enclosures type g223b for hcmos version type g218 b for hcmos, pecl; lvpecl and lvds version package codes: code height ?h? pin length ?l? co de height ?h? pin length ?l? a1 5,9 na b1 5,9 na dimensions: mm dimensions: mm pin connections pin connections 1 control voltage (vc) 1 control voltage (vc) 2 ground (case) 2 n/c / enable (optional) 3 rf output 3 ground (case) 4 supply voltage input (vs) 4 rf output 5 complementary rf output / (n/c: hcmos only) 6 supply voltage input (vs) outline drawing: g223b outline drawing: g218 b enable true table hcmos lvp ecl / lvds pin 2 pin 4 pin 5 pin 4 pin 5 high data n/c no data no data open data n/c data compl. data low high tristate n/c data compl. data
c5310 vcxo vec tron international www.vectron.com v. 2007 - 03 - 09 page 4 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 100 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax marking c5310a1 - xxxx frequency * vi ayyww absolute maximum ratings parameter min typ max. units co ndition supply voltage (vs) 7 v operable temperature range - 30 +80 c storage temperature range - 40 +90 c typical phase noise and jitter (52 mhz; hcmos output) (155,52 mhz; pecl output) frequency range [hz] s f (f) [db] jitter [ps rms] frequency range [hz] s f (f) [db] jitter [ps rms] 100hz to 1.5mhz - 77db 0.432ps 500hz to 1.5mhz - 73.96db 0.205ps 50khz to 1.5mhz - 91db 0.086ps 65khz to 1.5mhz - 75.87db 0.165ps 12khz to 20mhz - 80db 0. 306ps 12khz to 20mhz - 65.34db 0.553ps typical phase noise and jitter ( 155,52 mhz; lvds output) ( 622,08mhz; pecl output) frequency range [hz] s f (f) [db] jitter [ps rms] frequency range [hz] s f (f) [db] jitter [ps rms] 1 00hz to 1.5mhz - 83 db 0.072 ps 1khz to 5mhz - 75 db 0.048 ps 50 khz to 1.5mhz - 88 db 0.041 ps 250khz to 5mhz - 76 db 0.041 ps 12khz to 20mhz - 76 db 0.162 ps 12khz to 20mhz - 70 db 0.082 ps
c5310 vcxo vec tron international www.vectron.com v. 2007 - 03 - 09 page 5 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 100 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax typical tuning slope typical frequency stability v s tp -150,00 -100,00 -50,00 0,00 50,00 100,00 150,00 200,00 0,00 0,50 1,00 1,50 2,00 2,50 3,00 3,50 tuning voltage [v] -20 -15 -10 -5 0 5 10 15 20 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 temp. [c] p p m standard shipping method *bei w 24 mm nur untere lochreihe * by w 24 mm only lower hole line gurtoberseite tape upper side gurtunterseite tape buttom side abwickelrichtung unwinding direction lage im gurt position in tape pin 1 a x p b k enclosure type tape width w [mm] quantity per meter quantity per reel dimension p production tolerance complying din iec 286 - 3 g218 b / g223 b 24 83,3 850 12 recommended reflow profile
c5310 vcxo vec tron international www.vectron.com v. 2007 - 03 - 09 page 6 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 100 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax profile feature pb - free assembly /sn - pb assembly profile feature pb - free assembly /sn - pb assembly average ramp - up rate (t l to tp) 3c/second max. time 25 c to peak temperature 8 minutes max. preheat - temperature min ts min ) - temperature min ts max ) - time (min to max) (ts) 150c 200c 60 - 180 seconds time maintainted above - temperature (t l ) - time (t l ) 217 c 60 - 150 seconds ts max to t l - ramp - up rate 3c/second max. time maintainted above - temperature (t l ) - time (t l ) 217c 60 - 150 seconds time within 5c of actual peak temperature (tp) 20 - 40 seconds peak temperature (tp) max 260c ramp - down rate 6c/second max. note: all temperatures refer to topside of the package, measured on the package body surface. smd oscillators must be on the top side of the pcb during the reflow process. how to order this product: model stability code supply voltage code rf output code package code frequency control / enable frequency c5 31 0 d105 sv050 rfh a1 vs.operat. temp. range : d105: 15ppm - 20 ? +70c f305: 30ppm - 40 ? +85c enc losures: signal: supply: a1: h: 5.9 l: na rfh: hcmos b1: h: 5.9 l: na sv050: 5v rfp: pecl sv033: 3.3v rfl: lvds dimension: mm
|
